Stabilizer

We are a leading Wholesale Supplier of Stabilizer from Mumbai, India. Range 1 to 3 kva, 5 to 7.5 kva, 10 to 20 kva, 30 to 50 kva, 60 to 200 kva Stabilizer



MODEL NAME & NO.

1 to 3 kva Stabilizer

DESCRIPTION

1 to 3 kva Single Phase Voltage Stabilizer offered comprise highly functional Voltage Stabilizers that are designed using latest technology support so as to provide for optimum functional usage. These Voltage Stabilizers find extensive usage in controlling voltage fluctuations using solid state electronic circuitry. Being Air cooled stabilizers, these function as automatic line voltage correctors that use synchronous motor that provides for optimum functional usage.


FEATURES

  • Fully Soloid State IC base control circuitry using high Stability industrial grade silicon semiconductor
  • Relay / connector done totally eliminated reducing any chance of failure in the field.
  • Voltmeter with selector switch to see input and output voltages Short Circuit or overload protection by means of MCB /FUSE /MCCB .
  • Output voltage adjustment of + / - 15 volts per phase will be provided by means of preset on control card
  • No effect of load power factor Interchangeble plug in control for easy service ability .


MODEL NAME & NO.

5 to 7.5 kva Stabilizer

DESCRIPTION

5 to 7.5 kva Stabilizer offering an entire range of automatic voltage stabilizer for your sophisticated equipment at home and office. These stabilizers are mainly designed to maintain the voltage fluctuation between 140-280 V and provide a consistent power supply of 230V with accuracy of ± 9%. 5 to 7.5 kva voltage stabilizer will keep your expensive appliances safe from unexpected power fluctuation. You can buy servokon voltage stabilizer at lowest price


FEATURES

  • Fully solid state IC base control circuitry using high stability industrial grade semi conductor relay and wires.
  • High output accuracy plus minus 1%
  • Correction rate 35 volt/ second.
  • High efficiency, no wave form distortion.
  • Input voltage range 170 volt to 270 volt.
  • Output 230 volt.
  • Output cut limit 170 volt down, 270 volt high.
  • Mains cord provided for stabilizer INPUT supply.
  • ON / OFF Switch provided for stabilizer ON / OFF.
  • VOLTMETER provided for read OUTPUT VOLTAGE.

INDICATIONS :

  • INPUT ON : It was indicate the MAINS availeble .
  • TRIP : It was indicate the MAINS INPUT SUPPLY GO LOW or HIGH CUT.
  • OUTPUT ON : It was indicate the OUTPUT SUPPLY UNDER CONTROLS.


MODEL NAME & NO.

10 to 20 kva Stabilizer

DESCRIPTION

10 to 20 kva Voltage Stabilizers are virtually required at all such places where controlled and constant voltage is one of the most important ingredients. Like Hospitals, Laboratories, various life saving & testing equipments, pharmaceuticals, Research Institute Product Information Sakthi Servo Voltage Stablizer essentially employs a Solid-State circuit, which controls the Servo Motor. The motor is mechanically coupled to the arm of a continuously variable Auto Transformer (Variac) that feeds to the primary of a series control Buck-Boost transformer.


FEATURES

  • High Efficiency, Rugged Construction with Low No Load Losses
  • Auto - Manual Operation Facility through selector switch, Volts
  • Auto - Manual Operation Facility through selector switch, Volts
  • Over - Under Voltage Cutoff Protection through Contactor
  • Overload / Short Circuit protection through MCB/MCCB

SPECIFICATION

  • Input : 295V to 470V 3 Phases, 4 Wires, 50 Hz, Unbalance Single Phase 170V to 270 V
  • Output : 400V + 1%, 3 Phase,4 Wires, 50Hz, Balance Single Phase 230 V +/- 1 %
  • Cooling : Air Cooled
  • O/P Voltage Adjustment : + 10 V by means of Potentio Meter.
  • Controls : Auto / Manual
  • Specification Contactor : Overvoltage &Undervoltage Trip by means of Overload & Short circuit Protection by MCB
  • Anolog Voltmeter to see I/P & O/P Voltages Built in Single Phase Preventor
  • Indication : Mains ON, O/P ON , O/V, U/V Single Phasing Trip.
  • Approx Dimension : W*550mm, D*400mm, H*625mm
  • Cabling : input – 4 SQ mm and Out put 2.5 SQ mm.

MODEL NAME & NO.

30 to 50 Kva Servo Stabilizer

DESCRIPTION

We have in our stores 30 to 50 Kva Air Cooled Servo Stabilizer, which is made in accordance with various international standards. This Centralized servo stabilizer also provides protection from overload at the input. Leveraging on our years of experience in this domain, we manufacture servo stabilizers as per the market requirements.


FEATURES

  • Maximum workability
  • Low power consumption
  • Elevated service life
  • Effective in three phase applications
  • Electro- mechanical mechanism
  • Optimal performance

SPECIFICATION

  • Input : 295V to 470V 3 Phases, 4 Wires, 50 Hz, Unbalance
  • Output : 400V + 1%, 3 Phase,4 Wires, 50Hz, Balance
  • Cooling : Air Cooled
  • O/P Voltage Adjustment : + 10 V by means of Potentio Meter.
  • Controls : Auto / Manual.
  • Specification Contactor : Overvoltage & Undervoltage Trip by means of Overload & Short circuit Protection by MCB Anolog Voltmeter to see I/P & O/P Voltages Built in Single Phase Preventor
  • Indication : Mains ON, O/P ON , O/V, U/V Single Phasing Trip.

MODEL NAME & NO.

60 to 200 kva Servo Stabilizer

DESCRIPTION

Three Phase Servo Stabilizer Oil Cooled offered comprise highly functional Voltage Stabilizers that are designed using latest technology support so as to provide for optimum functional usage. These Voltage Stabilizers find extensive usage in controlling voltage fluctuations using solid state electronic circuitry. Being oil cooled stabilizers, these function as automatic line voltage correctors that use synchronous motor that provides for optimum functional usage.


FEATURES

  • High efficiency & Fast response.
  • Wide input voltage range trip conditions.
  • 99.99% failure proof control circuit.
  • No over under, shoots and hunting.
  • Built in bypass switch upto 250 Kva.
  • Less active component avoids failure ratings.
  • Special electronic circuit to operate on gensets.
  • No effect of power factor and frequency variations
  • Voltage at speed related to rate of fluctuations and avoids oscillations & hunting In ac motor drive.
  • Variable speed high torque ac servo motor proportionally controls corrections.
  • Rugged and smooth ac motor drive control through optoisolator circuit which is Highly reliable.
  • Separate isolated PCB for triac switching for motor.

SPECIFICATION

  • Input : 295V to 470V 3 Phases, 4 Wires, 50 Hz, Unbalance
  • Output : 400V + 1%, 3 Phase,4 Wires, 50Hz, Balance
  • Cooling : Air Cooled
  • O/P Voltage Adjustment : + 10 V by means of Potentio Meter
  • Controls : Auto / Manual
  • Specification Contactor : Overvoltage & Undervoltage Trip by means of Overload & Short circuit Protection by MCB Anolog Voltmeter to see I/P & O/P Voltages Built in Single Phase Preventor
  • Indication : Mains ON, O/P ON , O/V, U/V Single Phasing Trip.

OTHER PRODUCTS

UPS Systems Read More
Inverter
Read More
Stabilizer Read More
CVT
(Constant Voltage Transformer) Read More
Isolation Transformer Read More
Batttery
Read More
LED Systems Read More
Solar Systems Read More